If you want to know anything before buying our product(s) or have any other question, please send us a message and we will get back to you within 24 hours during working days.
If you like shopify you are going to love this amazing theme.
Hinges are the main components connecting the cabinet body and the cabinet
In the usual use of cabinets, the most tested ones are the hinges, so the
quality of the hinges will greatly affect the overall quality of the
There are basically three different installation methods for TDC
One: full cover (straight arm) The doors cover most of the cabinet side panels, but there are still gaps. The gap provided ensures that the door opens and closes smoothly
Two: half cover (middle bend) In this case, both doors share a side panel. The distance between the two doors is equal to the sum of the required minimum clearances. The coverage distance of each door is correspondingly reduced, requiring the use of a mid-swing arm hinge.
Panel furniture is favored by consumers because of its non-deformable panels,
diverse colors, and easy disassembly and assembly. And as long as you master
some small skills, you can easily choose your favorite panel furniture to
a unique and warm living room.
Hardware connectors are the key
Hardware connectors are the most intuitive quality standard. Good hardware accessories should be free to switch, no noise, and no peeling of the surface coating. Some high-end locks for high-end furniture are imported, and foreign language signs can be found on them. The metal parts are required to be smart, smooth, with good surface electroplating treatment, without rust, burrs, etc. The precision of the matching parts should be high, and the open connectors should be flexibly rotated.
People pay attention to the decoration of the bathroom, which leads to the
attention to the bathroom hardware pendant.
Bathroom hardware is generally divided into three components. That is, the base (fixed part), connecting parts, and functional parts; one side of the base is close to the wall or board, and this side is generally not surface-treated. You can basically know what material is used just by looking at its color; the connecting parts are basically surface-treated, and only the following methods can be used; most of the functional parts are mainly tubular and rod-shaped raw materials , If the tubular object, its inner wall can generally be seen. Due to the different specific gravity of the raw materials, the weights of objects with approximately the same volume are not the same (light materials go out).